### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

# Support for i2c and lm_sensors
alias char-major-89    i2c-dev

# Old nvidia support ...
alias char-major-195 NVdriver 
alias /dev/nvidiactl char-major-195 

# wlan
alias wlan0	prism54

### modules-update: end processing /etc/modules.d/aliases

### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
alias snd-card-0 snd-ali5451
alias sound-slot-0 snd-card-0


# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
options snd cards_limit=1

### modules-update: end processing /etc/modules.d/alsa

### modules-update: start processing /etc/modules.d/hsf
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias /dev/modem /dev/ttySHSF
alias char-major-240 /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF
alias char-major-241 /dev/ttySHSF
options hsfserial serialmajor=240 calloutmajor=241
alias char-major-242 hsfosspec
alias /dev/hsfdiag hsfosspec
alias /dev/hsfdiag* /dev/hsfdiag
alias char-major-243 /dev/hsfdiag
options hsfosspec dcpmajor=242 diagmajor=243
probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2

### modules-update: end processing /etc/modules.d/hsf

### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### modules-update: end processing /etc/modules.d/i386

### modules-update: start processing /etc/modules.d/omnibook
# modules.d config file for OMNIBOOK
# this file was automatically generated from linux-mod.eclass

# Configurable module parameters
# ------------------------------
# ectype:	Type of embedded controller firmware
# ac:	Use 0 to disable, 1 to enable AC adapter status monitoring
# apmemu:	Use 0 to disable, 1 to enable /proc/apm emulation
# battery:	Use 0 to disable, 1 to enable battery status monitoring
# blank:	Use 0 to disable, 1 to enable lcd console blanking
# display:	Use 0 to disable, 1 to enable display status handling
# dock:	Use 0 to disable, 1 to enable docking station support
# dmi:	Use 0 to disable, 1 to enable /proc/omnibook/dmi
# fan:	Use 0 to disable, 1 to enable fan status monitor and control
# fan_policy:	Use 0 to disable, 1 to enable fan control policy support
# lcd:	Use 0 to disable, 1 to enable to LCD brightness support
# onetouch:	Use 0 to disable, 1 to enable onetouch handling
# temperature:	Use 0 to disable, 1 to enable thermal status and policy support
# touchpad:	Use 0 to disable, 1 to enable touchpad handling
# user:	Use 0 to disable, 1 to enable users to set parameters

# For Example...
# ------------------------------
options omnibook ac=1
options omnibook apmemu=1
options omnibook battery=1
options omnibook blank=1
options omnibook display=1
options omnibook dock=1
options omnibook dmi=1
options omnibook fan=1
options omnibook fan_policy=1
options omnibook lcd=1
options omnibook onetouch=1
options omnibook temperature=1
options omnibook touchpad=1
options omnibook user=1

### modules-update: end processing /etc/modules.d/omnibook

### modules-update: start processing /etc/modules.d/ppp
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-13	n_hdlc
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate
alias net-pf-24		pppoe

### modules-update: end processing /etc/modules.d/ppp

### modules-update: start processing /etc/modules.d/svgalib
probeall  /dev/svga  svgalib_helper

### modules-update: end processing /etc/modules.d/svgalib

