# $XdotOrg: xc/programs/Xserver/hw/xfree86/xorgconf.cpp,v 1.1.6.1 2004/04/02 21:47:17 eich Exp $
#
# Copyright (c) 1994-1998 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $

# **********************************************************************
# This is a sample configuration file only, intended to illustrate
# what a config file might look like.  Refer to the XF86Config(4/5)
# man page for details about the format of this file. This man page
# is installed as /usr/share/man/man5/xorg.conf.5x 
# **********************************************************************

# The ordering of sections is not important in version 4.0 and later.

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    # For XFS, uncomment this and comment the others
    #FontPath	"unix/:-1"
    FontPath	"/usr/share/fonts/local/"
    FontPath	"/usr/share/fonts/misc/"
    FontPath	"/usr/share/fonts/misc:unscaled"
    FontPath	"/usr/share/fonts/75dpi/"
    FontPath	"/usr/share/fonts/75dpi/:unscaled"
    FontPath	"/usr/share/fonts/100dpi/"
    FontPath	"/usr/share/fonts/100dpi/:unscaled"
    FontPath	"/usr/share/fonts/Type1/"
    FontPath    "/usr/share/fonts/TTF/"
    FontPath    "/usr/share/fonts/truetype/"
    FontPath	"/usr/share/fonts/CID/"
    FontPath	"/usr/share/fonts/Speedo/"
#
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath	"/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

	Option "AllowMouseOpenFail"  "true"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option	"NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option	"DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option	"DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option	"DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option	"DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option	"AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option	"DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option	"AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

    Option	"blank time"	"10"	# 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

    Option	"standby time"	"20"
    Option	"suspend time"	"30"
    Option	"off time"	"60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
        Option      "CoreKeyboard"

	Option "XkbModel" "pc104"
	Option "XkbLayout" "de_CH"
	Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment
# out the above line, and uncomment the following line.

#    Option	"Protocol"	"Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

    Option	"AutoRepeat"	"500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option	"Xleds"	"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option	"XkbModel"	"pc102"
#    Option	"XkbModel"	"pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option	"XkbModel"	"microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option	"XkbModel"	"pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option	"XkbLayout"	"de"
#
# or:
#
#    Option	"XkbLayout"	"de"
#    Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option	"XkbOptions"	"ctrl:swapcaps"


# These are the default XKB settings for xorg
#

    Option	"XkbModel"	"pc101"
    Option	"XkbLayout"	"de_CH"
    Option	"XkbVariant"	""
    Option	"XkbOptions"	"nodeadkeys"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier 	"SynaMouse"
    Driver	"synaptics"
    #Driver	"mouse"
    Option	"Protocol"		"auto"
    Option	"Device"		"/dev/psaux"
    Option	"ZAxisMapping"		"4 5"
    Option	"Emulate3Buttons"	"true"
    Option	"Emulate3Timeout"	"70"
    Option	"SendCoreEvents"	"true"
    Option	"MaxTapTime"		"180"
    Option	"EmulateMidButtonTime"	"70"

EndSection

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"

# The mouse protocol and device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option	"Protocol"	"Microsoft"
    Option	"Device"	"/dev/mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option	"Protocol"	"Auto"

# When using mouse connected to a PS/2 port (aka "MousePort"), set the
# the protocol as follows.  On some platforms some other settings may
# be available.

#    Option "Protocol"	"PS/2"

# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use
# the following instead of any of the lines above.  The Device line
# is not required in this case.

#    Option	"Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some older Logitech mice.  In
# almost every case these lines should be omitted.

#    Option	"BaudRate"	"9600"
#    Option	"SampleRate"	"150"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option	"Emulate3Buttons"
#    Option	"Emulate3Timeout"	"50"

# ChordMiddle is an option for some 3-button Logitech mice, or any
# 3-button mouse where the middle button generates left+right button
# events.

#    Option	"ChordMiddle"

EndSection

Section "InputDevice"
    Identifier	"Mouse2"
    Driver	"mouse"
    Option	"Protocol"	"MouseMan"
    Option	"Device"	"/dev/mouse2"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse"
	Driver      "mouse"
	Option      "Protocol" "Microsoft"
	Option      "Device" "/dev/ttyS0"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
	Identifier  "PS/2 Mouse"
	Driver      "mouse"
	Option      "Protocol" "auto"
	Option	    "ZAxisMapping" "4 5"
	Option      "Device" "/dev/psaux"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
	Option	    "MaxTapTime" "180"
	Option	    "EmulateMidButtonTime" "75"

EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
	Option		"SendCoreEvents"	"true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier	"spaceball"
#    Driver	"magellan"
#    Option	"Device"	"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier	"spaceball2"
#    Driver	"spaceorb"
#    Option	"Device"	"/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier	"touchscreen0"
#    Driver	"microtouch"
#    Option	"Device"	"/dev/ttyS0"
#    Option	"MinX"		"1412"
#    Option	"MaxX"		"15184"
#    Option	"MinY"		"15372"
#    Option	"MaxY"		"1230"
#    Option	"ScreenNumber"	"0"
#    Option	"ReportingMode"	"Scaled"
#    Option	"ButtonNumber"	"1"
#    Option	"SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier	"touchscreen1"
#    Driver	"elo2300"
#    Option	"Device"	"/dev/ttyS0"
#    Option	"MinX"		"231"
#    Option	"MaxX"		"3868"
#    Option	"MinY"		"3858"
#    Option	"MaxY"		"272"
#    Option	"ScreenNumber"	"0"
#    Option	"ReportingMode"	"Scaled"
#    Option	"ButtonThreshold"	"17"
#    Option	"ButtonNumber"	"1"
#    Option	"SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

# The identifier line must be present.

    Identifier	"Generic Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

#    HorizSync	31.5  # typical for a single frequency fixed-sync monitor
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

#    VertRefresh	60  # typical for a single frequency fixed-sync monitor

#    VertRefresh	50-100        # multisync
#    VertRefresh	60, 65        # multiple fixed sync frequencies
#    VertRefresh	40-50, 80-100 # multiple ranges of sync frequencies

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent

#    ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

    Mode "640x480"
        DotClock	25.175
        HTimings	640 664 760 800
        VTimings	480 491 493 525
    EndMode

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock	45
#        HTimings	1024 1048 1208 1264
#        VTimings	768 776 784 817
#        Flags		"Interlace"
#    EndMode

# If a monitor has DPMS support, that can be indicated here.  This will
# enable DPMS when the monitor is used with drivers that support it.

#    Option	"dpms"

# If a monitor requires that the sync signals be superimposed on the
# green signal, the following option will enable this when used with
# drivers that support it.  Only a relatively small range of hardware
# (and drivers) actually support this.

#    Option	"sync on green"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"

# The Identifier must be present.

    Identifier	"Generic VGA"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver	"vga"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# Various other lines can be specified to override the driver's automatic
# detection code.  In most cases they are not needed.

#    VideoRam	256
#    Clocks	25.2 28.3

# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID	"PCI:0:10:0"

# Various option lines can be added here as required.  Some options
# are more appropriate in Screen sections, Display subsections or even
# Monitor sections.

#    Option	"hw cursor" "off"

EndSection

Section "Device"
    Identifier	"any supported Trident chip"
    Driver	"trident"
EndSection

Section "Device"
    Identifier	"MGA Millennium I"
    Driver	"mga"
    Option	"hw cursor" "off"
    BusID	"PCI:0:10:0"
EndSection

Section "Device"
    Identifier	"MGA G200 AGP"
    Driver	"mga"
    BusID	"PCI:1:0:0"
    Option	"pci retry"
EndSection


Section "Device"
	### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
	Identifier  "Card1"
# The following line is auto-generated by KNOPPIX mkxf86config
	Driver      "vesa"
	VendorName  "All"
	BoardName   "All"
#	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
	Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
	Driver      "ati"
	VendorName  "ATI Technologies"
	BoardName   "Radeon"
	BusID       "PCI:1:5:0"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultColorDepth 16
	SubSection "Display"
		Depth     1
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
		Modes "1500x1040" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection


# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.



# xfree86config

Section "ServerLayout"
	Identifier     "Configured by Hand 13.4.04"
	Screen      	0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	#InputDevice    "PS/2 Mouse" "CorePointer"
	InputDevice    "SynaMouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
	Load  "GLcore"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
        Load  "bitmap" # bitmap-fonts
	Load  "speedo"
	Load  "type1"
	Load  "freetype"
	Load  "xtt"
	Load  "record"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
	Identifier	"Monitor0"
	Option	"DPMS"	"true"
	VendorName	"IBM"
	ModelName	"IBM2193"
#	HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
	HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
	VertRefresh  50.0 - 76.0 # Very conservative. May flicker.
# These are some Modelines that happen to work on many systems
# Especially the "1024x768" has been thoroughly tested, even on Laptops
	Modeline "640x480"     25.175 640  664  760  800   480  491  493  525 #60Hz
	Modeline "800x600"     40.12  800  848  968 1056   600  601  605  628 #60Hz
	Modeline "1024x768"    85    1024 1056 1152 1360   768  784  787  823
	Modeline "1152x864"    92    1152 1208 1368 1474   864  865  875  895
	Modeline "1152x864"   110    1152 1240 1324 1552   864  864  876  908
	Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
	Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
	Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace
	Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
	Modeline "1280x1024"  126.5  1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
	Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
	Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
	Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
	Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
	Modeline "1600x1200"  162    1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
	Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
	Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
	Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
	ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
	ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
EndSection
